DIY: Bow Shirt

You'll need
over sized t shirt
scissors
bows
fabric glue

Steps
1. Snip off one shoulder from your shirt
2. Take your bows and put them on your shirt however you want
3. Glue them on

Easy peasy!

DIY: Flag Shorts

You'll need
A Pair Of Shorts
A Flag
Pins
Fabric Glue
Scissors

Steps
1. Pick one side of shorts to start off with.
Then lay it out on your shorts. Now, take your scissors and cut out half of the flag.

2. Take your fabric glue and glue away! You need the fabric glue so you can hold it into place.

3. Now that the glue is dry, we're gonna cut the excess fabric. For example, the pocket area and bottom.

4. Repeat 1-3, now if you are doing the right side, be careful with the zipper part, you don't want to cover it completely.

So, there you have it folks, flag shorts!

DIY: Floral HeadBand

You'll need:
Hot glue gun
Scissors
Glue Sticks
Floral Embellishments
Braided Elastic

Let's Begin
1. Take your Elastic and measure how much you'll need for your head. Once you've found how much you need, go ahead and cut off where you marked.

2. Take your hot glue gun and line at the end where your gonna to attach your headband.

3. Now, take your Embellishments and apply glue to the back and stick it on the elastic.When you are gluing the flowers, space them out to an inch to an inch and a half. Repeat this step until you go all around the band.

4. Let it dry!

There you go, an affordable and pretty headband! Look out for more posts!

DIY: Studded Ballet Flats

You'll need
Ballet flats
Sharpie
Glass and Bead Glue
Metal Studs
Tweezers

Let's Start!
1. The first step is to figure out where you're going to put your studs. You decide!
2. Once you have figured out your patern, take your sharpie and draw dots where you want your studs to be placed.
3. Now it's time for the fun part, you're gonna take your glue and put your first dot directly on to the shoe. Then, take your tweezers and place the stud on the glue. And you're gonna repeat this until you have covered your pattern.
4. Now the last part is to let them dry over night.

There you go! You have new and improved ballet flats, look out for the next post!

DIY: Rainbow High Waisted Shorts

You'll need:
Old jeans that you'll never wear
Chalk
Scissors
Bleach
Spray Bottle
Tye Dye Colors
Gloves

Start!
 1. Take an old pair of high waisted jeans and put them on. Take you chalk and mark off wear you wanna cut them off. Take them off and cut them.

2. Now, you're gonna fill a empty spray bottle with bleach. Lay your shorts flat on a towel and spray away! make sure the bleach has covered the shorts.

3. Make sure your shorts are dried at least 80% before you start to dye them. Put your gloves on and get ready to rumble. Now, lay them on a flat surface and make sure you have something to protect the surface because this can get messy. Start off in the middle (where the zipper is) and make your way out. turn your shorts around and do the same thing. The colors from the front probably bleed through so you don't have to worry about it.

4. I highly recommend you wait for a day and let the shorts sit before throwing them into the washer. They have to be almost 100% dry. The dryer makes your shorts a little fluffy so don't be afraid.

Optional:
Before you Tye Dye your shorts, you can add slits
How to do it?
Take your scissors and cut line near the bottom of the pants. Make sure you don't cut the pockets!

And there you go, I hope you enjoyed my first DIY post! There's more to come.